+923217173331
  sales@gepl.pk
  +923217173331
  sales@gepl.pk

OUR PRODUCTS

33 KV Incoming/ Out going Panels

We have the experience to design 33KV panels for specific requirements of clients. Our this product is being supplied in sodan (South Africa) and Iran. Also 33KV VCB Panel is used for the protection of transformer. These panels are precisely designed following strict industry parameters and are appreciated for features like superior quality and cost effectiveness. The Vacuum Circuit Breaker offered exceptional performance during the restriction of electrical short circuit.

22 KV Incoming Outgoing Panels

Our company is not only meeting the quality standard of Pakistan but all over the glob and supplying our products. This product is being supplied to Afghanistian which spec is as under FEATURES : Conformity to IEC standard Internal arc classification IEC 60502-1Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1.2 kV) up to 30 kV (Um = 36 kV)

15KV Incoming & Out going Panels

Backed by the experienced team of professionals we are engaged in offering the wide range of industrial metering panel. Mechanism is arranged there emergency manual charging and release of the spring is possible without electrical operation. Before dispatching the product following testing standards are followed, Power frequency voltage dry test IEC publication 62271-00,voltage test on control and auxiliary circuits IEC 62271-100,

11 KV Incoming/ Outgoing Panels

We are not only supplying our this product to WAPDA but all over the private sectors in Pakistan .The Enclosure confirm to IEC 62271-200. All live parts including Bus Bar, connections, circuit Breaker, load break switch, Power Transformer, current Transformer, Protection Transformer shell be suitable Enclosed. Surge arresters FEATURES: Type of breaker - VCB

11kv Auto & Manual Changeover Panels

Our products are being widely used in industries where more than one electricity sources are used. We provide a fully automatic 11KV changeover system in the event of a power failure that transfers the load from the Primary source of electricity to secondary source of electricity. It also provide the complete protection in case of Over load - Short circuit - Earth fault

11kv Ringman Units

This specification covers design, manufacture, shop testing, inspection, packing, delivery to site, erection, testing and commissioning of 11 KV Metal Enclosed, panel type, extensible Indoor/ Outdoor SF6 RING MAIN UNIT (RMU) fully type tested according to IEC 60298 standards. This RMU should be complete with all components necessary for its effective and trouble free operation along with associated equipment etc. such components should be deemed to be within the scope of supplier’s supply. The design of the switchgear should be exclusive and specific responsibility of supplier and should be comply with current good engineering practice, the relevant codes and recommendation, the project specific requirements. The RMU should befixed type SF-6, insulated circuit breakers

11Kv Bulk Metering Panels

We are WAPDA approved manufacturer and supplier in all DISCOs. Bulk Metering Panel is suitable for outdoor / indoor and temporary / permanent installation. Bulk Metering Panel is intended to be installed at 11 KV to check the energy consumed by individual industrial consumers. TECHNICAL SPECIFICATION: Current Transformer having burden of 10 VA and accuracy class is 0.5 (range 100/5 up to 400/5) Maximum demand indicator, Kilowatt hour 3 phase 4-wire, operational voltages 110 VAC, 50Hz,C.T and P.T operated having reading scale as per WAPDA specification Single Pole Potential Transformer having ratio 11000/1.732/110/1.732 Volt. The potential transformer having a burden of 100 VA

Main LT Distribution Panels

We are instrumental in offering a wide assortment of LT (Low Tension) Panel, which is manufactured using high grade raw material that are sourced from the most valued vendors of the market. Offered product range is widely accredited in the market as they are efficient enough to meet the changing needs and trends of customers. Customers can avail these panels in various sizes and grades as per their needs and requirements

Main LT Distribution Panels

We are instrumental in offering a wide assortment of LT (Low Tension) Panel, which is manufactured using high grade raw material that are sourced from the most valued vendors of the market. Offered product range is widely accredited in the market as they are efficient enough to meet the changing needs and trends of customers. Customers can avail these panels in various sizes and grades as per their needs and requirements

Sub-Main LT Distribution Panels

Our company designs an exclusive range of change over panels, which are made of best quality raw materials to ensure durability and efficiency. Our change over panels serves various industries' requirements. We also provide a fully automatic changeover system in the event of a power failure that transfers the load from the mains supply to an auto start generator or from a primary mains supply to a secondary mains supply. The change over panels has the castle lock facility that prevents from accidental change over. FEATURES: Auto/Manual Selection is available

Variable frequencies Drive Panels

We hold the expertise in manufacturing and supplying Variable Frequency Drive panels. These VFD a type of adjustable drive used in electro-mechanical drive systems to control AC Motor speed and torque by varying motor input frequency.

Transformers

Lower Power Rated Range (11kV, 6.6 kV, 3.3 kV, 440V, 230V) and are generally rated less than 200 MVA. High Power Rated Range (400 kV, 200 kV, 110 kV, 66 kV, 33kV) and are generally rated above 200MVA. Frequency Rated 50 / 60 Hz It work at low efficiency at 50-70%, small size, easy in installation, having low magnetic losses & it is not always fully loaded

Control & Relays Panels

The Control & Relay Panels, offered by us, are designed to meet the needs of control and protection. Control & Relay Panels are manufactured using hi-grade raw materials and pre-treatment process is used to thoroughly clean all the fabricated parts and then coated with primer. Our offered panels are manufactured from high-grade components that are procured from the trusted vendors of the market. We strictly follow the norms and standards laid down by industry at every stage of production. Moreover, these are highly praised owing to their unmatched quality and longer functional life

ATS Distribtion Box

1 MCCB TP 630A 36KA Adjustable 2 Schneider NM1-NS630H 2 Magnetic Contactor 600A AC3 , Coil 230VAC 2 Telemecanique LC1-F-630 3 Phase Indication lights 220VAC 6 Chint Nd-16-22 4 On/Off Indication Light 220VAC 4 Chint ND-16-23 5 Control Relay with Base Coil 220VAC 3 Omron MY-2N 6 ATS/AMF Module with accessories 1 Deep See/Comap STD 7 Digital Volt Meter 96x96mm with Selector 2 GGT Ev-3-96 8 Digital Amp Meter 96x96mm with Selector 2 GGT EPM-4D-96 9 Current Transformer 600/5A 6 Fico

Auto & Manual Change Over Panels

Our company designs an exclusive range of change over panels, which are made of best quality raw materials to ensure durability and efficiency. Our change over panels serves various industries' requirements. We also provide a fully automatic changeover system in the event of a power failure that transfers the load from the mains supply to an auto start generator or from a primary mains supply to a secondary mains supply. The change over panels has the castle lock facility that prevents from accidental change over. FEATURES: Auto/Manual Selection is available

APFI Panel

Our highly appreciated product Automatic Power Factor improvement Panel is used to achieve unity/near unity power factor The power factor controller of our APFI Panels monitors the reactive power which intern helps in saving energy. FEATURES: Fixed type, free standing, floor mounting Extendable to both sides Cubical type compartmentalized construction Bus Bar made of electrolytic grade, aluminum alloy, copper with certified% IACS conductivity Front and Rear Access

AMF Panels

Being a quality conscious organization, we manufacture, export, trad and supply a huge range of AMF Panels that are available as per the domestic and international standard of quality. These products are available at reasonable prices to the clients and our products are soured from the reliable and authentic vendors. Thus, we offer these panels in customized patterns as per the requirement of the clients. These panels are steady in nature, cost efficient and power saving module. These panels are offered in various specifications as per the requirement of the clients.

Synchronizing Panels

GEL brings alternative solution to energy projects by using synchronizing systems. With combining more than one generator for your high KVA needs, this system provides significant advantages comparing against single generator with same power. Especially the synchronization panel that design by GEL engineers offers integrated solution through customers with its technology. GEL developed lower priced systems and show its difference by using its technical expertness, global resources and its production methods for obtaining high energies with synchronization of more the one generator against all kinds of scenarios. Lower cost, Cost comparison, Lower first investment budget, Flexible usage, Sustainable and reliable system

Control Desk

Control desk is use where operation is different side from panel. Our panels are suitable as per height for human operation and spacious operation desk, easy to operate by hand, made from good quality base Pushbutton & Indicators.

Temperature Controls Panels

With an aim to satisfy our clients, we are engaged in offering Temperature Control Panel with PID (proportional-integralderivative) Control. These are manufactured by using high grade material and advanced technology that ensures their high reliability. Besides this, these are used for controlling temperature and also require less maintenance. FEATURES: Controller Accept input RTDs/ Thermocouples Single or Three Phase Mains Operated Single or Three phase Heater Control Output

Motor control Center Panels

Our company designs an exclusive range of change over panels, which are made of best quality raw materials to ensure durability and efficiency. Our change over panels serves various industries' requirements. We also provide a fully automatic changeover system in the event of a power failure that transfers the load from the mains supply to an auto start generator or from a primary mains supply to a secondary mains supply. The change over panels has the castle lock facility that prevents from accidental change over. FEATURES: Auto/Manual Selection is available.

Power Control Center Panels

PCC panels are made up of 14/16 SWG CRCA material semi bolted structure firmly supported. Ensures desired breaking capacities, temperature rise & IP protection. Enough Space for incoming & outgoing Cable termination. Outgoing terminals are stud type as standard practice. All starters are Type Two Co-ordinated. CT terminals, Cable Alley Illumination Lamp, Space Heaters with Thermostats are standard features of our Panel boards. FEATURES: GEPL pays great attention to the standard of workmanship and finishes. To ensure high quality finishing, all metal parts undergo thorough chemical treatment for anti-rust and epoxy powder adhesion. As standard, epoxy

cable ladder

Cable ladder systems and cable tray systems are designed for use as supports for cables and not as enclosures giving full mechanical protection.

Cable Tray

We hold the expertise in manufacturing and supplying Variable Frequency Drive panels. These VFD a type of adjustable drive used in electro-mechanical drive systems to control AC Motor speed and torque by varying motor input frequency and

Industrial Fans